1. Before operation, the inclined bed NC lathe must pass a few precision tests before cleaning the whole machine. Specifically, it is necessary to use cotton or silk cloth containing detergent to clean. At this stage, cotton yarn or gauze should not be used to avoid machine blockage. That is to say, the anti-rust oil or anti-rust paint applied on the inclined bed NC lathe to protect the guide rail surface and the processing surface should be cleaned out when it leaves the factory, and the surface should be cleaned together. The dust. Together, smooth oils designated by manufacturers are applied to all sliding surfaces and working surfaces.
2. Check carefully whether the parts of the inclined bed NC lathe have filled the oil according to the relevant requirements, and whether the cooling fluid in the cooling box is sufficient. Whether the oil of lathe hydraulic station and active smoothing equipment can reach the regular position of oil level indicator.
3. Check whether the switches and components in the electric control box are normal and whether the integrated circuit boards are working properly together.
4. In the future, we will also launch a smooth assembly to ensure that there is enough smooth oil in the smooth part and smooth oil road, so as to make a series of preparations for the lathe before operation.
Above is about the preparation of automatic CNC lathe before commissioning, more relevant content please pay attention to our website.